Once the card is clear to send, a packet of information can be sent. RSSI can be used internally in a wireless networking card to determine when the amount of radio energy in the channel is below a certain threshold at which point the network card is clear to send (CTS). −100), the closer the value is to 0, the stronger the received signal has been. Thus, when an RSSI value is represented in a negative form (e.g. Therefore, the greater the RSSI value, the stronger the signal. RSSI is an indication of the power level being received by the receiving radio after the antenna and possible cable loss. In an IEEE 802.11 system, RSSI is the relative received signal strength in a wireless environment, in arbitrary units. It can also be sampled by an internal analog-to-digital converter (ADC) and the resulting values made available directly or via peripheral or internal processor bus. In zero-IF systems, it is derived in the baseband signal chain, before the baseband amplifier. RSSI is often derived in the intermediate frequency (IF) stage before the IF amplifier. However, because signal strength can vary greatly and affect functionality in wireless networking, IEEE 802.11 devices often make the measurement available to users. RSSI is usually invisible to a user of a receiving device. In telecommunications, received signal strength indicator ( RSSI) is a measurement of the power present in a received radio signal. Also shown: signal bars of 2 cellular networks, and signal bars of a Wi-Fi network. Signal strength of -74dBm (or 66 asu) displayed on a smartphone.

Wireless rssi values